Lincoln Electric Techalloy products have a wide range of nickel alloy grades that will meet the most stringent industry requirement. All products are lot controlled and tested standard for ensured quality and performance. View Nickel Alloys Brochure Welding Consumables Packaging
Used for welding of nickel-chromium-molybdenum alloys as well as for overlay cladding on carbon, low alloy or stainless steels; Used for dissimilar joints between nickel-chromium-molybdenum alloys and stainless, carbon or low alloy steels
Oxford Alloy 59 is a nickel-chromium-molybdenum alloy with an extra low carbon and silicon content. This wire has excellent corrosion resistance and high mechanical strength. This alloy is used to weld low-carbon-nickel-chromium-molybdenum alloys, for welding the clad side of joints in steel clad with low-carbon-nickel-chromium-molybdenum
AWS ErNiCr-3 For welding nickel-chromium-iron alloys (. Inconel? 600) and for dissimilar joints. This alloy is used to weld nickel-chromium-iron alloys to themselves and for dissimilar welding between nickel-chromium-iron alloys and steels or stainless steels, as well for overlay.
Nickel Chromium Molybdenum Iron is one of numerous metal alloys sold by American Elements under the trade name AE Alloys?.Generally immediately available in most volumes, AE Alloys? are available as bar, ingot, ribbon, wire, shot, sheet, and foil.
ERNiCrMo-4 Nickel-Chromium-Moly Alloy Welding Wire ERNiCrMo-4 Nickel-Chromium-Moly Alloy Welding Wire Introduction. ERNiCrMo-4 Nickel Alloy C276 is used for welding materials of similar chemical composition as well as dissimilar materials of nickel base alloys, steels, and stainless steels.
ERNiCrMo-2 is used for welding nickel-chromium-molybdenum base materials to itself, steel and other nickel base alloys. Can clad steel using GTAW, GMAW, welding processes. Can weld on high nickel base alloys exposed to high temperatures.
High Temperature Corrosion Resistant Alloys. The 80/20 nickel chromium alloy is often used for wrought and cast parts for high temperature applications, as it has better oxidation and hot corrosion resistance compared to cheaper iron-nickel-chromium alloys. This nickel chromium alloy is highly suited to applications that are subject to oxidation.
ERNiCrMo-3 Nickel-Chromium-Moly Alloy Welding Wire Introduction. ERNiCrMo-3 (NA625) is used primarily for gas tungsten and gas metal arc and matching composition base metals. It is also used for Gas Metal Arc Welding (GMAW) and Gas Tungsten Arc Welding (GTAW) of Inconel 601, Inconel 625, Incoloy 825 and a range of high alloy austenitic and
ERNiCrMo-4 is used for welding nickel-chromium-molybdenum base materials to itself, steel and other nickel base alloys and for cladding steel. Deposited Chemical Composition % (Typical) C =
Lincoln Electric Techalloy products have a wide range of nickel alloy grades that will meet the most stringent industry requirement. Used for TIG, MIG and SAW welding of nickel-chromium-molybdenum alloys; This filler ERNiCrMo-14.
Sanicro? 55 is a nickel-chrome-molybdenum alloy of type alloy 686 and is ISO 18274: NiCr21Mo16W4/Ni6686; AWS /ASME : ERNiCrMo-14
Nickel Alloy ERNiFeCr-1(AWS ) Filler Wires, high Nickel Alloy ERNiFeCr-1 Filler Wires, and TIG welding of Incoloy 825 and other nickel-chromium- molybdenum-copper alloys. Nickel High Nickel Alloys ERNiCrMo-10 Filler Wires.
Nickel Alloy ERNiCrMo-10(AWS ) Filler Wires, high Nickel Alloy ERNiCrMo -10 Filler These wires consist of nickel-chromium and molybdenum alloys.
welding wire is suitable for joining nickel-chromium-molybdenum nickel alloys and steels to nickel alloys, for overlay welding and is available as both wire and rod. Classifications: SFA/AWS ; ERNiCrMo-3; Wire Electrode; EN ISO
stainless super austenitic and duplex alloys, but INCO-WELD 686CPT meets nickel-chromium-molybdenum alloys. (INCONEL Alloy 686 . ERNiCrMo- 14) showed no attack. .. Table 4. Chemical composition of TIG welding wires.
ERNiCrMo-10 is used for welding nickel-chromium-molybdenum base materials to themselves, steel and other nickel base alloys, and for cladding steels.
ERNiCrMo-3 LOW IRON is used for TIG, MIG and SAW welding of nickel-chrome- molybdenum alloys. This filler metal
AWS ASME SFA . DESCRIPTION: Pinnacle Alloys ERNiCrMo-4 is designed for welding nickel-chromium-molybdenum This wire is generally used.
Group III - Nickel-molybdenum alloys. B-2. N10665 Use clean stainless steel wire brushes or abrasive disks Nickel-chromium and nickel-chromium-iron wrought and cast alloys do not contain ferrite and do not exhibit a .. ERNiCrMo- 14.